双面金属包覆介质波导模序数的判别方法

在双面金属包覆介质波导中 ,随着介质层厚度的变化 ,会出现TM0 模与TM1 模的分离和简并两种状态 ,从而影响衰减全反射 (ATR)谱中模序数的确认。通过对金属波导的理论分析和实验研究 ,提出了三种模序数确认方法 :本征角计算法、吸收峰全峰半宽比较法和吸收峰峰间距比较法 ,实现了两种状态下对模序数的准确判断     

空气中水含量的计算及其在色谱分析中的应用

本文介绍了空气中水含量的计算式并编制了空气中的水含量表。实验证明,表上的数据适用于色谱分析。     

Spectroscopy of the regenerative soot

The mechanisms and processes of the formation of the regenerative soot in a graphite hollow cathode discharge that produces and emits carbon clusters are presented. Mass spectrometry with a specially designed E×B velocity filter analyzes the entire range of the charged clusters from C ₁ to ∼C ₄₃₀₀. The state of the carbon vapour within the source is evaluated by using the characteristic line emissions from the carbonaceous discharge whose formative mechanisms depend upon the kinetic and potential sputtering of the sooted cathode. The carbonaceous discharge generates atomic and ionic C and its clusters C _m (m≥ 2), noble gas metastable atoms and ions, energetic electrons and photons in the cavity of the graphite hollow cathode. The parameters of soot formation and its recycling depend critically on the discharge parameters, the geometry of the hollow cathode and 3D profile of the cusp magnetic field contours. Received 2nd July 2001 and Received in final form 10 September 2001     

Laser vaporization: A versatile method for studying metal clusters

Vaporizing solid samples of metals and semiconductors with a YAG Laser is a method well suited for producing molecules and clusters of those materials. The clusters are examined by either laser-induced fluorescence (LIF) or mass spectroscopic methods. The technique is valuable for both gas phase and matrix studies. The method is described and some applications, studying either the structure of small metal molecules or their reactions, are reviewed, with emphasis on our recent results from the LIF studies of LiBe, Al₂ and the reaction of Al with oxygen, yielding A1₂O. For larger clusters, Ion Cyclotron Resonance is an extremely valuable method, as we demonstrate by its application to the reactions of small charged silicon clusters with strong oxidising agents.     

Photo-Absorption and photochemical decomposition of copper and alkaline-earth ß-diketonates as source gases of high-Tc superconducting films

For low-temperature deposition of oxide films relating to Bi-Sr-Ca-Cu-O superconductors, photo-absorption and -decomposition properties were examined with respect to copper and alkaline-earth ß-diketonates. It was confirmed that all ß-diketonates examined were promising as source materials for photochemical vapour deposition (photo-CVD) using a low-pressure mercury lamp, in view of their large light absorption coefficients at wavelength 254 nm. The light irradiation was effective for the formation of highly crystalline oxide films at temperatures below 600 °C. By combining two sources, Ca₂CuO₃ and SrCuO₂ films were prepared. Photo-CVD of c-axis oriented Bi₂Sr₂CuO_x film was achieved by the irradiation of ternary sources of Bi(C₆H₅)₃ and strontium and copper ß-diketonates at 500 °C.     

The transition of spontaneous polymerization of acrylamide to “explosive” regime

Experimental results related to the transition of spontaneous polymerization of acrylamide complexes with metal nitrates to the “explosive” regime at room temperature are presented. It is suggested that the “explosion” has a thermal nature. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 859–861, April, 1997.     

类锂离子与软X射线激光研究有关的跃迁波长和振子强度

本文用多组态HXR自洽场方法和优化以Slater径向积分法相结计算了类锂离子(Z=13～17,19)1s~2nl~2LJ(2≤n≤5,0≤l≤4)能级之间的跃迁波长和振子强度,并和实验进行了比较。就软X射线激光跃迁4f—3d而言,本文计算的波长值比其它文献的计算值更接近于观测值。     

Vibrational spectra of (NH4)3ZnCl5

IR and Raman spectra of (NH₄)₃ZnCl₅ have been recorded. The observed spectra have been analysed on the basis of the vibrations of ZnCl ₄ ²⁻ and NH ₄ ⁺ ions. The appearance of multiple Raman bands indicates the presence of two different types of ammonium ions. The effect of anisotropic crystalline field over the ZnCl₄ and NH₄ tetrahedra is also discussed. The assignment of internal modes has been verified by the potential energy distribution calculations.     

A high-current electron beam ion trap as an on-line charge breeder for the high precision mass measurement TITAN experiment

The precision of atomic mass measurements in a Penning trap is directly proportional to the charge state q of the ion and, hence, can be increased by using highly charged ions (HCI). For this reason, charge breeding with an electron beam ion trap (EBIT) is employed at TRIUMF’s Ion Trap for Atomic and Nuclear science (TITAN) on-line facility in Vancouver, Canada. By bombarding the injected and trapped singly charged ions with an intense beam of electrons, the charge state of the ions is rapidly increased inside the EBIT. To be compatible with the on-line requirements of short-lived isotopes, very high electron beam current densities are needed. The TITAN EBIT includes a 6 Tesla superconducting magnet and is designed to have electron beam currents and energies of up to 5 A and 60 keV, respectively. Once operational at full capacity, most species can be bred into a He-like configuration within tens of ms. Subsequently, the HCI are extracted, pass a Wien filter to reduce isobaric contamination, are cooled, and injected into a precision Penning trap for mass measurement. We will present the first results and current status of the TITAN EBIT, which has recently been moved to TRIUMF after assembly and commissioning at the Max-Planck-Institute (MPI) for Nuclear Physics in Heidelberg, Germany.     

Carbon–epoxy composites based on fibers coated with nylon 6,6: hygrothermal ageing versus interlaminar shear strength

Carbon fibers were coated in situ with a thin film of polyhexamethylene adipamide by an interfacial polycondensation technique. The modified fibers were used for the preparation of epoxy-based unidirectional composites. Specimens of these materials were immersed in water until equilibrium conditions were attained. The weight gain at equilibrium was determined as a function of the immersion temperature, the fiber volume fraction and the polyamide content deposited on the fibers. Water penetration in specimens made with uncoated carbon fibers increases when the volume fraction decreases. Introduction of the polyamide interlayer initially increases the water absorption, but reduces it at higher immersion temperatures and/or higher polyamide contents. The treated specimens were subjected to the short beam test to determine the interlaminar shear strength (ILSS). The data show that the ILSS decreases with water penetration but increases when the immersion temperature increases from 40 to 70°C. The overall performance encountered is discussed in terms of the possible roles of the polyamide interphase while taking into account mechanisms concerned with matrix plasticization, interphase degradation and residual stress relaxation.